dan-inject forside ny blaa 01

Dan-Inject Instruction,
Unloading of an unused or undischarged dart syringe.

WARNING: WHEN HANDLING PRESSURISED AND LOADED DARTS EXTREME CAUTION MUST BE EXERCISED AT ALL TIMES. SAFETY CRITERIA MUST BE ADHERED TO.

When an undischarged or unused dart is recovered the first step must always be to render the dart into a safe state by 


 

fitting a protection cover and releasing any remaining air pressure. The following illustrated steps should be adapted to the situation encountered.

Darts can be removed from DAN-INJECT rifle/pistol barrels using tweezers.


     

Remove the red stabiliser from the dart.

  unload dart syr 01
     

Holding the dart horizontally, depress the red plunger to release air pressure using the DAN-INJECT venting pin.

  unload dart syr 02
     

Remove the protection cap from the dart.

  unload dart syr 03
     

If using proprietary medication/drug bottles with rubberised seals, insert a plain hypodermic needle, directed away from the operator, into the seal before proceeding to the next step. This will allow excess air pressure to vent from the bottle.

  unload dart syr 04
     

Holding the dart with the needle pointing down, insert the needle into a suitable receptacle as far as possible. The silicon sleeve will slide along the needle shaft exposing the injection ports.

  unload dart syr 05
     

Hold the dart with the attached bottle.
Using a DAN-INJECT coupling adapter on an air filler syringe, steadily and smoothly insert 12ml of air into the dart air chamber. The air pressure will slowly force the black plunger forwards and inject the drug into the bottle.

  unload dart syr 06
     

Do not store drugs or water in the dart syringes for prolonged periods. The extreme pH of most drug formulations will adversely effect the plunger and dart barrel after 3-4 days.
Always clean the dart and needle after use.


Download Print-version (PDF)


Cleaning of syringes


Cleaning of syringes